Rear Sprocket for Honda CB500X (2013 – 2018) Steel

The steel rear sprocket for Honda CB500X (2013 - 2018) engages the chain through its teeth. For CB500X from 2013–2018, select the sprocket against the carrier used in that model-year range.

Steel sprocket characteristics

The sprocket is CNC-machined from CrMn 5045 steel, with steel teeth carrying the chain's pulling load directly. This option suits riders who prefer steel in the area that repeatedly engages with the chain. A steel sprocket may weigh more than an aluminum sprocket of the same dimensions. In return, it provides the steel-tooth construction required for the application. An excessively worn chain or incorrect chain slack can still cause rapid wear on a new sprocket.

Selecting tooth count and chain size

A different tooth count can change the bike's response. With the front sprocket unchanged, fewer rear teeth produce a lower final drive ratio. To retain familiar riding characteristics, keep the existing rear tooth count. This model is available with 41 teeth. This product uses a size 520 chain. Check the markings on your bike's chain.

Checking the rear wheel assembly

Compare the old sprocket's bolt-hole count, center bore and mounting face to distinguish the CB500X 2013–2018 wheel assembly from later bikes. The sprocket-to-carrier mounting arrangement may differ even under the same bike model name. Photograph the bolt heads, contact face and center bore to avoid selecting a part that only looks similar externally.