Front Sprocket for BMW F 700 GS
MREV-P-000023Front sprocket for BMW F700GS: Heat-treated Chromoly 440 steel for the sprocket that drives the chain. Select a tooth count, spline profile and chain size that match the bike. When the existing front sprocket teeth are worn, inspect the chain and rear sprocket too.
The front sprocket for BMW F700GS mounts on the gearbox output shaft to drive the chain and transfer power to the rear wheel. Do not use F800GS fitment information to conclude that an F700GS sprocket fits the shaft.
What is Chromoly 440 steel used for?
Chromoly 440 steel is used for the front sprocket, which is CNC-machined and heat-treated. Steel suits the small front sprocket, whose teeth drive the chain through repeated revolutions. When selecting a replacement front sprocket, the priorities remain correct chain-size engagement and a secure spline fit on the shaft. Regular chain cleaning and adjustment also affect sprocket wear.
Selecting tooth count for your riding needs
Retaining the front tooth count is a straightforward way to replace a worn part without changing the gearing. Reducing the front tooth count with the rear sprocket unchanged increases the ratio. Check sprocket-cover clearance and chain slack as well. This model is available with 17 teeth.
Checks before installation
Provide spline-profile images and the front sprocket retaining arrangement on your F700GS for comparison. Photograph the old front sprocket while it is still on the shaft to record the outward-facing side and retaining arrangement. After removal, compare its splines and thickness with the replacement.
Compatible vehicle models for Front Sprocket for BMW F 700 GS
Recorded gearing options
Only recorded pitch, position and tooth options are shown. Final-drive changes must be evaluated against the complete front/rear setup; tooth count alone is not treated as a performance claim.